This 539C was not working because all three meters were bad. The meters were replaced with digital meter replacements and the tube tester was calibrated. Analog meters in tube testers
This 539C was not working because all three meters were bad. The meters were replaced with digital meter replacements and the tube tester was calibrated. Analog meters in tube testers
The Hallicrafters SX-96 is very similar to the SX-100 without a few of the features like notch filter and crystal calibrator. This radio was quite a mess and required some
This Magnavox AC-DC radio needed five new tubes, a re-capping, and troubleshooting to find a broken connection in the FM tuner. I added an inrush current limiter and some additional
The Heathkit IO-102 is a transistor based oscilloscope. I replaced the electrolytic capacitors and some transistors that were very temperature sensitive and caused the unit to drift badly. This unit
This Precision EV-10A was brought to me by a Customer wanting to get it fixed and working again. When this tester was made, they installed .01 uf RF filter capacitors
This Zenith radio came to me partially working with the wrong knobs. The cabinet was left alone. The radio was electronically restored. All electrolytic and wax capacitors were replaced. Several
This is a Philco Model 60 that has been restored. The electronics were previously repaired. The repairs were undone to restore the electronics as much as possible to original. The
This is a very nice Heathkit RF Signal Generator that has been completely restored and calibrated. Included is the original manual (not a copy) in excellent condition. Original cable is
This is a restored Heathkit IG-82 Sine-Square Wave Signal Generator. The signal generator operates through audio frequency range and beyond. This is a very handy signal generator for aligning the
This is a restored Feiler TS-3A Signal Tracer. They labeled it an Electronic “Stethoscope”. This signal tracer can be used for AF and RF signals. There is a tube detector